Autel MaxiAP AP200 Bluetooth Scan Tool

Single Brand Professional Scan Tool - Add Car Brands as Required

For Android & iOS

The wireless diagnostic interface MaxiAP AP200 is a professional bluetooth OBD scan tool for single brand. Suitable for Android and iOS making your smart devices a powerful diagnostic tool. Featuring full system diagnostics and 19 maintainance reset functions covering most car brands in Australia. It comes with one free software to select for your desired car brand. More options can be purchased directly from the App. A perfect Autel scan tool for DIYers.

Professional Level Diagnostic Scan Tool

With superior systems diagnosis, this multipurpose obd2 scanner can be used to read all available systems’ ECU information to facilitate the vehicle diagnosis. The complete systems vary from different cars and they usually include Engine, transmission, ABS, SRS, SAS, TPMS, EPB and Fuel systems etc.

• Read DTCs from the vehicle’s control systems to locate problem areas, and offer solutions
• Erase the codes easily after DTCs retrieving and certain repairs have been carried out
• Live data shows each parameter item displayed in analog, text, waveform graph modes etc
• The active test used to access vehicle-specific subsystem and component tests

Advanced Reset Functions

This Bluetooth OBD2 scanner is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. There is some commonly-used special reset services are listed for your reference:

Oil Reset – Perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.
EPB Reset – Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
BMS Reset –Evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
SAS Reset – perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the sensor EEPROM.
TPMS Reset – quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.
IMMO Service - Disable the lost vehicle keys and program the replacement key fob.
DPF Regeneration – Manage DPF regeneration, DPF component replacement teach-in and DPF
teach-in after replacing the engine control unit.

*the functions are vehicle model related so if you are after a particular function for a particular vehicle please contact us and we will check for you

OBD Functions

• Read extensive current, pending and permanent codes in OBD system quickly
• Clear detected fault codes and turn off the Check Engine Light efficiently
• View graphical live data of vehicle’s computer module(s) for easy analyses
• View the vehicle’s operating parameters at the moment a DTC is detected
• Read I/M readiness status to have a vehicle inspected for state emissions compliance
• Perform O2 sensor test to check fuel efficiency and vehicle emissions
• Read the results of on-board diagnostic monitoring tests for specific components/systems
• Retrieve the vehicle information of VIN, CINs, and CVNs completely
• Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system

Flexible Diagnostic Software Coverage

Autel MaxiAP AP200 comes with only one free vehicle software for lifetime use. If you need other vehicle software, you can buy them from App Store or Google Play at the cost of USD 21.99 each. The software that you buy is valid for 12months. After it expires, you can make another purchase if needed.

OPERATING PROCEDURES:
1. Download and install the app-MaxiAP200 in Google Play or App Store to your device;
2. Register and log in the MaxiAP200 APP;
3. Get one free car software through Mall after binding VCI for the first time;
4. Plug the MaxiAP200 tool into the vehicle’s Data Link Connector (DLC)
5. Turn on the vehicle ignition while turn the engine off
6. Tap Me/Setting button of your device to pair the MaxiAP AP200 with your device
7. Start to diagnose your car.