ScanGauge2 can help you monitor your vehicle’s most vital systems and provide the kind of real-time information you’ve been missing. Features include more than 15 built-in digital gauges, 5 sets of trip data and an easy-to-use OBD2 Scan Tool that shows both set and pending trouble codes — all in an ultra compact design that installs in minutes.

OBD2 Digital Gauges

ScanGauge2 provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 4 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.

  • CLSD LP / OPEN LP: Fuel System Loop Status
  • MAP: Manifold Absolute Pressure
  • BST: Boost
  • KPG / LHK / KPL / KPH: Fuel Economy & Consumption
  • RPM: Revolutions Per Minute
  • TPS: Throttle Position Sensor
  • FWT / CWT: Water Temperature
  • AVG: Average Fuel Economy
  • TFC: Trip Fuel Cost
  • CPM: Cost Per Mile
  • VLT: Battery Voltage
  • FIA / CIA: Intake Air Temperature
  • FPR: Fuel Pressure
  • GPH / LPH: Litres / Gallons Per Hour
  • IGN: Ignition Timing
  • LOD: Engine Loading
  • HPR: Horsepower

Trip Computers

Five built-in trip computers keep track of everything from fuel cost to distance traveled and everything in between. The ScanGauge-2 lets you try different driving techniques and routes and gives quick feedback on how they affect fuel use. TANK Trip which you reset when you fill up the tank. It can provide you with “to empty” data as well as other useful information including:

  • Fuel Economy
  • Fuel Used and Cost
  • Maximum Coolant Temp
  • Distance
  • Maximum RPM
  • Drive Time
  • Maximum Speed
  • Average Speed
  • Current Tank of Fuel information: Distance to Empty / Time to Empty / Fuel to Empty

OBD2 Scan Tool

ScanGauge-2 Can display Diagnostic trouble code, tells you how many there are and the Trouble Codes themselves. Data captured when the Trouble Code was set can be recalled to help troubleshoot the problems.

  • Reads Trouble Codes
  • Clears Trouble Codes
  • Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
  • Turns Off “CHECK ENGINE” Lamp
  • Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing

​ScanGauge-2 Exclusive Features


The ScanGauge-2 features the exclusive X-GAUGE™ programmable gauge system. The X-Gauge™ gives you the ability to customise your ScanGauge-II by adding additional vehicle specific digital gauges to monitor parameters such as Transmission Temperature, Trip Data and Fuel Economy information.

To learn more about X-Gauges or find the suitable X-Gauge for your car visit ScanGauge Australia


The Performance Monitor™ allows you to measure and record performance data. You can designate a specific digital gauge to record as well as save and recall the data of up to 8 performance runs for later review and comparison. Performance Monitor lets you step through performance run data by key increments of time, speed and distance giving you a clear picture of your vehicle’s performance.


OBD2 Digital Gauges Engine Data Scanner
Built In & Programmable X-Gauges™️ ScanGauge Exclusive Feature
Read & Clear Engine Fault Codes 
Performance Monitor™️ & Multiple Trip Computers 
Customisable Screen Backlight Colour
Made in USA with 3 Yrs Australian Warranty

NON-VOLATILE MEMORY(stored information is not lost when disconnected)

  • User settings automatically saved
  • Up to 10 user commands can be stored and recalled
  • Today, Yesterday and Tank Trip data automatically saved
  • Vehicle settings automatically saved


  • No Tools Required!
  • Cable detachable at the ScanGauge
  • Easily move from vehicle to vehicle
  • ScanGauge Compact Size
  • Size 4.8"W x 1.4"H x 1"D


  • Automatic delayed power-down after engine shutoff
  • Automatic power-up when engine is started
  • Manual power-up with delayed power-down via HOME key


  • Simple on-screen operation
  • 4 menu driven soft keys
  • User settable update rate (Slow, Normal and Fast)
  • A HOME key to quickly return to the start screen


  • Display Colour, 7 Standard screen colours and a custom setting with 63 possible colours.
  • Backlight for night use
  • User settable Off, Low and High

ScanGauge Products

Comparison Table






OBD-II Interface - -
J1939 and J1708  - -
Scan Tool Functions
Built-In Digital Gauges
Built-In Trip Computers
X-Gauge Feature
Automatic X-Gauge - - -
Performance Monitor - - -
Colour Backlight -
Colour Touch Screen - - -
WiFi Updates - - -
Audible & Visual Alarms - - -
Computes Horsepower - - -
Realtime Profit/Loss - - -
Size 12.7 x 8.1 x 2.55 cm 12.2 x 3.8 x 2.55 cm 12.2 x 3.8 x 2.55 cm 12.2 x 3.8 x 2.55 cm


99% of orders are dispatched from our Melbourne warehouse within 24 hours after payment is cleared. All orders are shipped with Australia Post e-Parcel with tracking and signature on delivery.

Express shipping is available at additional cost. For next day delivery, please ensure your postcode is within Australia post Next Day Delivery network.


We offer 30 days money back guarantee on all orders. If your item was purchased in error, or you've simply changed your mind, it may not be too late for a refund. The item must be returned in original re-saleable condition - Not opened, used or damaged and ready to be put back on the shelf.


All products supplied by AZscanners come with 12 months limited warranty unless otherwise specified. Warranty covers defects in materials and/or workmanship. If a defect arises and a valid claim is received, AZscanners may at its option repair or replace the product.

Naturally the warranty cover does not extent to cover damage caused by normal wear and tear, accidents, misuse, lack of maintenance, neglect, natural disaster, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions.

Why Buy Scan Tools From Us?

Australia's Trusted Supplier of Premium Diagnostic Scan Tools

Since 2013, AZscanners has been at the forefront of supplying top-quality diagnostic scan tools and products across the nation. Renowned as a trusted Australian-owned company, we have earned the loyalty of a diverse clientele, including major companies, automotive workshops, mobile mechanics and home mechanics looking for best OBD scanners to buy.

30 Days Money Back Guarantee

We aim to make your buying experience as risk free as possible. We offer 30 days money back guarantee on all orders. If your item was purchased in error, or you've simply changed your mind, it may not be too late for a refund. The item must be returned in original re-saleable condition - Not opened, used or damaged and ready to be put back on the shelf.

Premier Quality OBD Scanners

At AZscanners, we're not just about selling tools; we're about offering solutions that match every need and budget. Our commitment to quality is unwavering, with each product meticulously selected for its reliability, performance, and compatibility. From professional-grade equipment for the seasoned mechanic to user-friendly devices for the DIY enthusiast, our range is thoughtfully curated to ensure you find exactly what you need without compromise.

Dedicated Local Support

Unlike many other scan tool sellers in Australia, we have a committed team of expert technicians and customer support centres to help you with any questions you have before or after purchase. Another reason why our customers keep coming back.

Fast & Reliable Shipping

99% of orders are dispatched within 24 hours after payment is cleared. We offer free shipping on the vast majority of items, and deliver to every state in Australia. All orders are shipped with Australia Post e-Parcel with tracking and signature on delivery. Express shipping is also available at additional cost.

Competitive Pricing, Uncompromised Quality

Because we conduct our business purely online and source our products direct from the manufacturer, our overheads are much lower than other retailers so we’re able to pass on huge savings to our customers.

130 reviews

I bought this for my 2013 76 series cruiser as I live on the road full time towing my caravan. It fits beautifully on the shroud around the steering column and doesn’t interfere with the gauges in the dash. The scan gauge provides some very useful information once set up. Fantastic product. Thank you very much. Kind regards Shaun.
18 March 2024
I ordered the scanguage 2 after hours on the Friday. The item was delivered on the following Wednesday. 3 working days as per advert. The gauge was easy to install and set up. I also added the code for Transmission fluid temperature gauge. Glad I bought the item. I can keep much better focus of car performance.
1 March 2024
Good product. X gauges for mitsubishi are easy to find online.
19 February 2024
Great product, easy to use and works just as described. Handy to get an accurate value of all the measured parameters in my Toyota's. As we have 3 in the family the one tool can scan all and be connected to whichever one I want to collect info from.
27 September 2022
Received with easy install instructions and completed in under two minutes. Completed X Gauge coding successfully after some trial and error.
1 August 2022
Great addition to my car, will be very handy to use and keep an eye on vital components while towing my van around the great Australia. Highly recommend.
13 January 2022
The product was delivered within a week, despite the Covid situation. The ScanGage-II was very easy to install and it got going without any problems. The clear and well written instruction manual needs an extra mentioning, it is unusual these days. I needed the ScanGuage especially for monitoring my transmission fluid temp and the programming was easy. I wish my vehicle (a Pajero 3.2 ltr mod 2016) had an EGT sensor, but unfortunately it doesn’t seems to be the case. I also wish the ScanGauge-II had the option of an audible warning signal that could be set for certain critical levels.
24 September 2021
I have just purchased this product Scan gauge 2 for my Ford Everest and so far the the product has been fitted and is working well. Technical support has also been very quick to respond to my questions.
16 June 2021
Purchased online and delivery was flawless. Install an easy task. Good instructions for set up of the various gauges. Great product.
7 June 2021
I did have a cheaper clone of the ScanGauge, it worked well, but my reason to change was two fold. The old one was "sweating" - the case as sticky from the heat and secondly but most importantly, as per your literature, I would be able to view my automatic gearbox temperature. I installed the ScanGauge and all worked well (much better than the old device). However when I tried to find the parameters for the HiLux auto gearbox, I could not find any for my year HiLux. I contacted your support line (very prompt and good service), but found that the ScanGauge does not support the Toyota HiLux 2009 Auto gearbox. I felt that it is incorrect to state the product would be able to read the temperature value. I checked your promotional material and you do not state that it only works on some models. I am currently working on other values (parameters) to try and add this feature to the gauge. So, in essence poor value for money - mis-leading advertising. Do I want a refund NO WAY, I think the product is very good except for one feature that I wanted. And, I always try and support items that are either Australian or have Australian support.
3 June 2021 Response
Sorry to hear that. As you most likely know based on your experience driving and monitoring your vehicle even without the ScanGauge some readings are available and some not. FYI the ScanGauge Australia tried to get the x-gauge for the transmission temp up and running on 4 speed auto Hiluxes many times but it would just not read for some reason. The info re compatibility can be found here as well as if you would check with us before or after the purchase.
My Amarok 2013 does not have instrument gauges and only relies on the computer to show and issue by lights etc. I found this to be most unreliable resulting in a wrapped cylinder head. I am now using the ScanGauge which give me an overall indication of how the motor etc is running. I feel more security now using the ScanGauge II
6 May 2021
Best purchase i have gotten for my vehicle, gives you so much data for the vehicle, scans and clears codes no worries and is easy to install
21 April 2021
Best purchase i have gotten for my vehicle, gives you so much data for the vehicle, scans and clears codes no worries and is easy to install
21 April 2021
This is the first time I have used a scanner and I am very impressed with what it can do very easy to set up as well I would throughly recommend it to anybody that wants an insite as to what your motor,transmission etc is doing
8 February 2021
Easy to use, small in size & light weight.
1 October 2020
Only used for 2 weeks still finding out information that it comes up with seeing how the right foot controls ie kph looking forward to see what happens ona trip
16 October 2019
A great product particularly if you are towing a caravan. Up to date information always there in front of you. I really like the Auto Transmission Temperature read out.
16 October 2019
Great product. Speedy and knowledgeable service.
19 September 2019
Easy to install, plug & play. Easy to calibrate to my 200 series LandCruiser GXL. Now I get accurate read outs on litres per 100km and range on a tank of fuel
22 June 2019
I am very happy with the Scangauge2 GAUGES page where I monitor the Intake air temperature(after the turbo and intercooler), Radiator water temperature, Auto transmission temperature and Kph which really gives you important information on the condition of the motor particularly when towing a 2.5 ton van with my Mitsubishi Diesel Pajero VRX DiD. The X-Gauge facility is great to enable you to add additional gauges. The Trip function is also very usefull (once you have set it up after running two tanks of fuel through the car). It lets you see such data as Fuel used , Fuel left in tank, Distance remaining until tank is empty, Time remaining until tank is empty, Trip distance, Trip elapsed time, Trip average speed, Trip cost and many more. It stores the data under CURRENT Trip which it then transfers it to TODAY'S Trip when the engine has been stopped for 3 minutes and then it transfers it to PREVIOUS DAY when the engine has been stopped for 8 hours. When monitoring your KPH you can add in a correction factor for thing like the effect of larger tyre sizes, inaccurate speed of the cars speedo etc so that the Kph is totally accurate. This is set up by using a GPS to find the true speed you are doing. It is also very adaptable to allow you to set up 'F or 'C, Gallons or Liters, Kl or Miles in all reports. The gauge allows a two step brightness and infinite colour changes to suit your taste.
16 May 2019
This Scangauge 2 is one of the best things I have purchased,the quality is great it has many read outs on it ,great piece of gear One happy customer
10 May 2019
Great service with very quick delivery. The scangauge worked exactly as advertised and was super easy to set up. It’s a much better alternative to multiple single gauges and displays heaps of information. The x gauge feature is great.
7 May 2019
amazing product,better than any on the market. easy set up ,easy to understand. does everything you could wish for .
30 April 2019
Great product. Simple install.
29 April 2019
Excellent product very easy to fit plug n play
18 March 2019
What a brilliant tool to have in the car particularly towing the caravan. Most useful for me is the exhaust gas temp, auto trans temp, boost pressure and DPF soot accumulation. Thanks for a product that work seamlessly without faulting. I highly recommend the scan gauge to anyone interested in protecting their drivetrain.
18 March 2019
Received scangauge quickly
28 January 2019
Excellent tool to monitor your vehicle condition, so easy to use and program, I particularly wanted to monitor my auto transmission temperature and was able to program it to display this
24 January 2019
Purchased the scanguage2 for my Ford Ranger, got the codes for what I needed to be monitored by the scanguage and within 20 minutes was up and working, very pleased with the results.
10 January 2019
Arrived within a few days of order. No problems setting up and provides me with all the info I need to ensure my Ranger is running good. Price always put me off before, but now I’m glad I took the plunge and bought one.
26 December 2018
Was a bit daunting at first, but instructions were excellent and quickly became easy to set up.
13 November 2018
Fantastic product
8 November 2018
Couldn't be happier with my Scanguage 2, awesome product for displaying engine results and diagnosing issues I would normally have to take to the mechanic for issues like check engine light. The postage was lightening fast also!
5 November 2018
Fantastic, bought it to provide information on the transmission temp while towing . Easy to use, easy to set up.
5 November 2018
Easy to install and set up. Use it to monitor transmission temperature. Codes for this are on the scan gauge au site.
17 October 2018
Great tool .easy to use and very happy with it.
27 September 2018
Product is great value for money, easy to use and gives the info you want & need. XGUAGES are easy as to install
18 September 2018
Speedy delivery (actually arrived earlier than estimated), so very happy with that :-). Had nearly 3 weeks now to get through the 'playing around' stage'. First, installation was a breeze once I worked out where to mount it (I just used the supplied velcro strips and mounted it on steering column, just behind the wheel - clear view and doesn't block out the dash gauges. After following the initial setup process, it was up and running.Have had a look through most of the settings, and added a few X-gauges, some with success, a couple not so much - possibly a limitation of what the car (BT-50) makes available. So, overall very happy - it fires up when the engine starts running, and shuts down when I stop. And all the data is at my fingertips. The data/settings, etc, can be a bit fiddly with the buttons, but once you are familiar with it, not really a problem. Haven't had the engine light come up, so haven't been able check out the code reporting and clearing, but I know it is there if I need it. Overall, very happy the unit and the service. Thank you.
12 September 2018
Great product. I now have it set up to monitor the atf temperature.
3 September 2018
Every off Road 4wd must have this ScaneGauge. Good seller and fast response.
29 August 2018
I purchased the scangauge 2 to monitor transmission fluid temperature. After reading the instructions I managed to program the extra gauge for that and also program the extra gauge to know what gear I am in. Really quick shipping and easy company to deal with.
23 August 2018
I have only used it for a short time it is very impressive I have added five gauges For peace of mind ,just to see what is going on under the Bonnet I was able to do a manual burn for the DPF filter having just purchased a late model 2017 Hilux I feel it is a must to have everyone’s toolbox if you are mechanically minded
2 August 2018
Bought this for my Mitsi Pajero Sport, great little tool to view real time running data, particularly when towing as you can monitor engine, transmission and exhaust temperatures whilst driving
2 August 2018
A great device, arrived on time,and a very versatile product.
31 July 2018
Scanguage 2 works absolutely perfect on my 2017 ISUZU D-Max. With the help of the scanguage website to get some extra x-gauge codes everything works perfectly. Also these guys have the best price I could find in Australia! 5 Stars for some of the fastest shipping I’ve gotten and amazing customer service.
23 July 2018
Disappointed with not being able to be able to select two sets of preset 4 gauge screens. Only one is set as default.
13 July 2018 Response
We are sorry to hear that. We will forward your feed back to our product team but please note that the feature you are talking about is not advertised on the product page and it is not standard on ScanGauge2. If you checked with us before your purchase like you did check about the compatibility following by cable length and later X-Gauge feature we would advice you that unfortunately it is not possible to set multiple screens on gauges view. If you would like to return the ScanGauge for full refund please contact our support team.
One of the best accessory I've purchased for my vehicle. Super easy to install works great no ugly aftermarket wiring, looks and works great easy to read and program. It's so good thinking of purchasing for my 2 other vehicles. Highly recommend ScanGauge-II.
2 July 2018
Good product quality, easy to install with excellent instructions. Much better then some of the cheaper alternatives. Well worth the money. Shipment was super fast and comms was great. Highly recommended seller.
28 June 2018
Easy purchase. Quick delivery. Would definitely recommend. Would purchase from fuel economy solutions again.
19 June 2018
Best feature of the gauge is the programmable display functions that other gauges do not have. The ones I set up are auto transmission temp, converter temp and % of time to do a DPF burn. Fairly easy to do and great when towing to keep an eye on your converter temp.
18 June 2018

Write a product review

Related products

More From This Category