AUTOOL BT760 12V/24V Battery Tester with Printer – Battery, Cranking & Charging
RRP $220.00
$184.50
16% OFF
AUTOOL BT760 12V/24V Battery Tester with Printer – Battery, Cranking & Charging
RRP $220.00
$184.50
16% OFF
Autohil ABM2 12V Bluetooth Battery Monitor – Dual Battery, Phone App
RRP $50.00
$35.00
30% OFF
AUTOOL BT360 12V Car Battery Tester – Battery, Cranking & Charging System Analys
RRP $110.00
$90.00
18% OFF
AUTOOL BT880 12V/24V Battery Tester + Printer & Parasitic Drain Test
RRP $280.00
$234.00
16% OFF
iCarsoft CR Legend OBD2 Scan Tool – Bidirectional, TPMS & Battery Test
RRP $2,300.00
$1,900.00
17% OFF
Topdon BT600 Plus 6V/12V/24V Battery & Resistance Tester, Printer
RRP $600.00
$532.00
11% OFF
AUTOOL BT460 12V/24V Battery Tester – Car & Truck Battery, Cranking & Charging A
RRP $199.00
$179.10
10% OFF
AUTOOL BT960 Lithium & Lead-Acid Battery Tester with Printer, 6–72V
RRP $370.00
$310.50
16% OFF
A weak battery is one of the most common causes of breakdowns and no-starts, and it usually shows warning signs well before it fails. A car battery tester shows you the battery's true condition in seconds, so you replace it only when you need to and can rule out the starter motor or alternator.
AZscanners stocks car battery testers from TOPDON, Autel, AUTOOL, Launch, Vident and iCarsoft, for home mechanics, 4WD owners, workshops and fleets, with fast delivery across Australia.
The TOPDON BT100, Vident iBT100 and iCarsoft BT900 are compact, affordable testers that check battery health, cranking and charging on 12V cars and utes. They're plug-and-test, with no setup needed.
The TOPDON BT200 tests 12V batteries, and also checks the starter and alternator on 24V vehicles. Its colour screen makes results easy to read.
The TOPDON BT300P, TOPDON BT600, AUTOOL BT760 and AUTOOL BT880 have built-in thermal printers for instant test reports. They're a professional touch customers trust.
The TOPDON BT600 Plus tests 6V, 12V and 24V batteries. It adds internal resistance testing, batch testing of up to 500 batteries, and a built-in rechargeable battery for testing deeply flat batteries down to 2V.
The AUTOOL BT880 includes a leakage current test, which helps you track down parasitic drains that flatten a battery overnight.
The Launch BST-360 and Autel MaxiBAS BT506 connect by Bluetooth and save reports to your phone. For dual-battery 4WD and caravan setups, the Autohil ABM2 stays connected and monitors voltage around the clock.
The Autel MaxiBAS BT608 combines a professional battery tester and printer with a full-system diagnostic scanner. It can register a new battery to the vehicle, which many modern cars need after a battery replacement.
Most battery testers are designed for lead-acid batteries only. For lithium, choose a tester with internal resistance testing, such as the TOPDON BT600 Plus or ALLOSUN EM3610.
Many testers list "12V/24V", which can mean two different things:
For example, the TOPDON BT200 tests 12V batteries but can check the cranking and charging system on a 24V truck. If you need to test the 24V truck batteries themselves, choose a tester that lists 24V battery testing, such as the TOPDON BT600 Plus. Check the product specifications, or contact us if you're unsure.
Most modern battery testers, including every TOPDON, Autel, Launch and Vident model we sell, use conductance testing. They send a small signal through the battery to calculate its health and CCA. This is fast and safe, and it doesn't drain the battery, create heat or cause sparks. You can also test the battery in the vehicle, and retest straight away.
A traditional battery load tester puts a heavy load on the battery for about 10 to 15 seconds. It's a proven method, but the battery must be fully charged and the tester gets hot. For most home mechanics and workshops, a conductance battery tester gives accurate results faster and more safely.
CCA (Cold Cranking Amps) is how much current a battery can deliver for 30 seconds at -18°C while staying above 7.2V. It's the key measure of a battery's ability to start an engine. Our testers support all major battery rating standards, including CCA, CA, BCI, MCA, DIN, IEC, EN, SAE, JIS and GB, so you can test batteries fitted to Australian, Japanese, European and American vehicles. Enter the rating printed on the battery label for an accurate result.
For most home mechanics, the TOPDON BT200 is a great all-rounder. It tests 12V car batteries, checks the cranking and charging system on 12V and 24V vehicles, and has an easy-to-read colour screen. For simple 12V testing on a budget, the Vident iBT100, iCarsoft BT900 or TOPDON BT100 are compact and affordable.
Yes. Every battery tester in our range supports Flooded, AGM, EFB and Gel lead-acid batteries. AGM and EFB batteries are standard in most modern stop-start vehicles, so select the correct battery type in the tester menu before testing, or the result may be inaccurate.
Most car battery testers are designed only for lead-acid batteries and can't give an accurate health result on lithium. Lithium batteries have a built-in battery management system (BMS), so a lead-acid test will often give a false pass or fail. For lithium batteries, use a tester that measures internal resistance, such as the TOPDON BT600 Plus or ALLOSUN EM3610. A rising internal resistance reading is a sign a lithium battery is ageing.
No. You can test the battery while it's still in the vehicle and connected. Turn off the engine and all accessories first. If the battery has just been charged or the car has just been driven, switch the headlights on for about 10 seconds before testing to remove the surface charge. Otherwise the result may look better than it really is.
Connect the red clamp to the positive terminal and the black clamp to the negative terminal. Select the battery type and enter the CCA rating from the battery label, then run the test. You'll get a result within seconds. For the cranking test, start the engine when prompted. For the charging test, run the engine and follow the on-screen steps.
Yes, if the tester supports the battery's voltage and CCA. Many motorcycle and small-engine batteries are rated below 100 CCA, which is under the minimum of many car battery testers, so check the tester's CCA range first. For 6V batteries, choose a model that lists 6V testing, such as the Autel MaxiBAS BT506 or TOPDON BT600 Plus.
Test it at least every six months, and before winter or a long road trip. Australian heat shortens battery life, so batteries over three years old are worth testing more often. Also test straight away if the engine cranks slowly, the lights dim or a warning light appears.
Yes. A battery tester takes the guesswork out of starting and charging problems. It helps you avoid replacing a healthy battery, and it warns you before a weak one leaves you stranded. For workshops, printed reports add credibility and help justify recommended replacements. With testers starting under $100, it's one of the most cost-effective diagnostic tools you can own.
Not sure which battery tester suits your vehicle or workshop? Our team will recommend the right tool for your batteries, budget and the tests you need.
Contact our teamWe’re more than just a supplier — we’re Australia’s specialist in diagnostic tools. Every product is selected for professionals who demand accuracy and reliability, with expert support whenever you need it. Not sure which scan tool is right for you? Contact us for expert advice.