Launch X431 PRO3 V+ Elite Diagnostic Scan Tool with Smartlink C, ECU Coding, Bidirectional Controls, Topology Mapping and 60+ Reset Functions

The LAUNCH X431 PRO3 V+ Elite is a premium workshop-grade diagnostic scan tool for professionals who need full vehicle system coverage, powerful service functions, and advanced features like SmartLink C, CAN FD, and DoIP. It delivers OE-level diagnostics, bi-directional controls, ECU coding, and J2534 programming, backed by 2 years of free online updates.

Ideal for mechanics, workshops, and technicians working with modern and electric vehicles, the X431 PRO3 V+ Elite supports over 60 reset functions, 3000+ active tests, and dealer-level access for brands like BMW, GM, VW, Jaguar, and Land Rover.

Main Features:

• SmartLink C with J2534 support for ECU programming and remote diagnostics

• All system diagnostics – read/clear codes, live data, freeze frame, module info

• 3000+ active tests and bi-directional controls for real-time troubleshooting

• 60+ service functions including injector coding, DPF regen, BMS, TPMS, EPB, SAS

• ECU coding and adaptation for customisation and module replacements

• Topology map – colour-coded visual display of all vehicle modules

• CAN FD and DoIP protocol support for newer vehicle platforms

• Pin detection to analyse OBDII socket voltage and supported protocols

• Compatible with petrol, diesel, and EVs (EV software available separately)

• 2 years of free online software and firmware updates via Wi-Fi

Special Functions:

• Oil Reset: Reset the oil life system and turn off the oil light after replacing the oil or oil filter  to start a new cycle.
• TPMS Reset: Quickly look up the tire sensor IDs from the vehicle’s ECU, and perform TPMS replacement and sensor test.
• EPB Reset: Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
• BMS Service: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information and prevent the related control module from detecting false information.
• IMMO Keys: Disable the lost vehicle keys and program a new replacement key fob. 
• ABS Bleeding: Bleed the air of a brake system to restore ABS brake sensitivity.
• SAS Calibration Reset: Calibrate the steering angle after replacing the steering angle position sensor and the mechanical parts of the steering system, etc. Stores the current steering wheel position as the straight-ahead position in the steering angle sensor and clear fault memory.
• DPF Regeneration: Perform the regeneration procedure as know as the DPF cleaning operation to clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
• Injector Coding: Code the injector after replacing or adjusting to correct the fuel injection volume of each cylinder more accurately.
• Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
• And Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Trans Adaption, etc.

Package Includes:

• X431 PRO3 V+ Elite tablet

• SmartLink C VCI (Bluetooth and J2534 support)

• OBDII main cable and adapter kit

• USB charger and cables

• Quick start guide

• Hard carry case

• 2 years free software updates included